‧AC‧S162SAP (MS)
172x150x51mm/6x2inch
220 CFM
Sinwan Plastic Impeller Tubeaxial Fan
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
S162SAP-11-1** 115 100~120 50/60 30/26 (~48) 2700/3000 195/220 5.5/6.2 0.48/0.43 12.19/10.92 45/50 2/1 £
S162SAP-11-2** 115 100~120 50/60 24/20 2400/2300 170/165 4.8/4.7 0.42/0.33 10.67/8.38 43/42 4/3 £
S162SAP-11-3** 115 100~120 50/60 18/16 2000/1600 135/118 3.8/3.3 0.33/0.23 8.38/5.84 35/33 6/5 £
S162SAP-22-1** 230 200~240 50/60 30/26 (~48) 2700/3000 195/220 5.5/6.2 0.48/0.43 12.19/10.92 45/50 2/1 £
S162SAP-22-2** 230 200~240 50/60 24/20 2400/2300 170/165 4.8/4.7 0.42/0.33 10.67/8.38 43/42 4/3 £
S162SAP-22-3** 230 200~240 50/60 18/16 2000/1600 135/118 3.8/3.3 0.33/0.23 8.38/5.84 35/33 6/5 £
  • ** = "WB" for wire lead type Ball bearing, or "TB" for terminal type Ball bearing
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Shaded pole, inner rotor, 1-phase, 2-pole
      Burnout Protection: Impedance protected
      IP Protection: -
      Frame: Aluminum die cast, black color treatment
      Impeller: 5 blades, glass fiber reinforced plastic, rated UL94V-0
      Bearing: Two ball bearings
      Rotation: CW seen on rotor
      Connection: Wire leads, or push-in terminal flat pins
      Weight: 890 g (1.96 Lbs)
      Dielectric Strength: Over 1 min.at 1,500 VAC, 0.5mA, 50/60 Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output:
      Operating Temp: Ambient non-condensing -20~+70℃
      Storage Temp: -40℃~+100℃(at 65%RH)
      Life Expectancy: L10 80K hours at 35℃, 30K hours at 60℃

     

    Metal Fan Guard
    G172-10H, G172-10HA


    Plastic Fan Guard
    G172P


    Plastic Fan Filter
    GRM172-30, GRM172-45


    Metal Fan Screen
    MF172S-30N